WELCOME TO THE HOME PAGE OF THE DRHS.
UPDATE 04/12/2017 – 315 SPECIALS DURING THE NATIONAL NARROW GAUGE CONVENTION.
CELEBRATORY PASSENGER SPECIAL – Monday August 28th, 2017
To celebrate the 10th anniversary of its return to steam, the oldest D&RGW engine, C-18 #315, operating on an original D&RGW narrow gauge railroad will pull a typical 1890s passenger train, from Antonito to Osier. The train will make several stops for photo run-bys and the trip includes lunch at Osier. Tentative schedule: board at 10:00 am for 10:30 am departure. Arrive Antonito no later than 6:00 pm. This passenger train replaces the freight train originally announced.
Details may change. Check this site or www.cumbrestoltec.com for updates.
Ticket price is $145.75 and includes lunch at Osier.
All ticketing is handled by C&TS.
FRIENDS OF THE C&TS SPECIAL RGS EVENTS – September 4th –6th, 2017.
D&RGW 315 will join RGS 455, departing from Antonito on Tuesday, September 5, for a special photo excursion that will support restoring Locomotive D&RGW 168. See www.cumbrestoltec.org or call 505-880-1311 for more details about these and other events during September 4–6.
The C&TS assumes no liability besides the actual price of the excursion ticket in the event the 315 is not operable during this event. The 315 was restored to operation in August 2007 and has proven to be reliable. It has never missed any of its scheduled events since then. However, the 315 is a unique machine and the Society cannot guarantee its operation or performance at any given time. There is no substitute locomotive of the same class available. Thus, C&TS or the Society may have to discontinue a run or change the schedule as necessary.
UPDATE 01/28/2017 – 315 DOUBLE HEADS OPENING DAY ON C&TS.
The Cumbres & Toltec Scenic Railroad will begin the 2017 season on May 27th with two special double-headed trains. Locomotives 315 and 463 will pull the opening day train from Antonito to Chama; while a pair of K-36 locomotives will pull the first train from Chama to the summit of Cumbres Pass and then on to Antonito. Tickets can be booked through the railroad’s web site at cumbrestoltec.com or by calling 888-286-2737.
UPDATE 11/25/16 – EMMA SWEENY, THE DEVIL’S IN THE DETAIL.
Last spring we were getting a good start on Emma Sweeny early in the season and were sure we would finish and hold a celebration in the fall. By mid summer we had made good progress on four rail cars that had to be completed this fall to meet terms of our State Historical Fund grant. However, the devil is in the details, and the final details took up the remaining time in the fall, causing us to stop work on Emma Sweeny. We will pick up again in the spring and finish for sure in 2017.
We did accomplish several tasks since reporting in our August newsletter. We installed the two full-length rain gutters along the roof edge and the two metal storm windows that swing out from the side of the cab. We installed most of the remaining piping under the cab. We sealed and painted many parts, which certainly brightened up Emma Sweeny. The exceptional new addition was the red and yellow banner for TOMAHAWK & WESTERN and the ship pictures with associated scrollwork on the tender. We had a precise photo of one part of the banner and fuzzy images from a VHS tape of the rest of it. From that we recreated the banner design, with much help from Jon Hammel of Denton Signs, who also made and applied the vinyl material to the tender. Tom Hahl made the two signboards for the sides of the boiler, recreating the edge molding. We will paint, letter them with EMMA SWEENY and mount them in the spring. Denton Signs made stencils for scrollwork on the cab and steam chests, which will be used to paint this artwork in brass in the spring.(Text and Photo: George Niederauer)
UPDATE 11/21/16 – ANOTHER FOUR FREIGHT CARS RESTORED.
As the weather turns colder in the San Juans so the opportunities for working on our four current projects become fewer. But the timetable for completing our restoration of two D&RGW Stock Cars, 5564 and 5627, Bunk Car 04432 And Flanger OT expires on the 31 March 2017 and the weather in Silverton between now and then prevents any work on the cars. So the cars had to be finished before the first snows of winter 2016/ 17 arrived. And we managed it.
Both Stock cars, double decked 5564 and single deck 5627, had much of the rotting woodwork replaced at Arboles Timberwrights, moved to Holts Sheet Metal in Durango for refitting of doors and eventually transported to Silverton in September 2015 where they stood on the transfer track. But some work still needed to be done before they could be considered ‘complete’. That included replacing some of the door hardware and lettering both cars. First job though was to replace the floors in the doorways of the double decked car 5564. On closer inspection we found that the upper floor was in good condition and so we left the orignal in place. However the lower floor had rotted badly in the door area and the boards were replaced, painted with linseed oil and the floor edges painted black to match the rest of the car.
Originally the corners of the door frames were lined with 1/4″ angled sheet metal to protect the wood. We had three serviceable liners and had five more made up by Rusty’s Welding in Ignacio, CO. The doors were missing a number of fittinga. We found two replacements for the distinctive door handles and had patterns for the door latches I-bolts and cleats and these too were fabricated in Ignacio. 5564 was missing a grab iron, brake wheel and retainer, replacements were found in our stores. Once all the missing detail parts were fitted and painted, lettering followed.
The stock cars are now complete, photos taken and reports sent to the Colorado State Historical Fund which provided 75% of the funding.
For further reading about the restoration of these two Stock cars go HERE.
BUNK CAR 04432
Box Outfit or Bunk car 04432, was in better shape all round but still needed a new roof and replacement of window frames, glass and doors. Much of the work was carried out on private land south of Durango and the car was eventually transported to Silverton where it was lettered and now stands in the Silverton Northern Engine Shed where it will winter.
More on this car HERE.
D&RGW Flanger OT was rebuilt in 1942 and much of the wooden frame was replaced with steel so no major structural work was needed. However some of the pipe work and operating equipment had been fitted later in the cars’ history and these were removed and the car reverted to its earlier guise just after it was rebuilt. It carries the later grey paint and has been re-lettered.
UPDATE 11/21/16 – THE SN OIL SHED STANDS AGAIN
Since the last report there has been a huge amount of progress on the rebuild of the Silverton Northern Oil Shed. The wall frame was erected in July and in mid August the roof joists finally arrived. The wall sheathing was finished in late August.
Most of the plywood that was used for concrete foundation forms was reused for the roof decking. Hauling the panels up to the top of the building was made easier when a couple visitors lent a helping hand. All this was accomplished between the rainstorms that rattled through Silverton at this time. In fact no sooner had the roof panels been nailed down then another rainstorm soaked the building. Work had to cease for the building to dry out so that drip edge could be installed on the roof deck which was covered in water shield just as another rainstorm came through. The following week the corrugated metal roof appeared and San Juan County Historical Society members Steve Rich and Steve Allen volunteered to be on the roof with Zeke Zanoni and Jerry Hoffer on the ground.The work took three and a half hours and not a single panel had to be cut.
In October with help from Duane Danielson, Tony Palmer, Mary Ann Dahm, and Mark Kasprowicz, house wrap was installed on the walls and plywood covers were placed on the door and window openings – the oil shed was sealed and the notorious Silverton weather could now throw what it liked against it! In spring and summer of 2017, we plan to install corrugated metal siding, build out the interior, install doors and window, and move in office furnishings and again we will be looking to volunteer work sessions to accomplish these tasks.(Jerry Hoffer)
BECOME A MEMBER. JOIN NOW
CONTACT US HERE
And here are some of our projects….